Wireless Shutter Release:
Note
:
To use this function , you need to purchase a JJC shutter release cable to fit
your camera.
1. Turn OFF both power of camera and receiver.
2. Mount the receiver to the camera hot shoe socket. Connect the shutter release cable
to the ACC2 socket of receiver and remote socket of camera body.
3. Set the channel selector at same position on both the transmitter and the receiver. To
use multiple camera units, be sure to set all receivers to the same channel.
4. Turn the power of camera ON and shift the Mode switch to the Camera option.
5. Press the test button on the transmitter.
6. Half press for focus and full press for shutter release.
7. If the transmitter and the receiver status lights are turning red and your camera
shutter release all of the settings are correct.
ONE YEAR UNCONDITIONAL GUARANTEE
If for any reason, this JJC product fails within ONE YEAR of the date of purchase, return
this product to your JJC dealer or contact
and it will be exchanged for you
at no charge (not include shipping cost). JJC products are guaranteed for ONE FULL
YEAR against defects in workmanship and materials. If at any time after one year, your
JJC product fails under normal use, we invite you to return it to JJC for evaluation.
Shenzhen JinJiaCheng Photography Equipment Co., Ltd.
Office TEL:
+86 755 82359938 / 82369905 / 82146289
Office FAX:
+86 755 82146183
Website:
www.jjc.cc
Email:
[email protected] / [email protected]
Address:
Main Building,Changfengyuan,Chunfeng Rd, Luohu District, Shenzhen, Guangdong, China
