2. All metallic cases of the windshield will attenuate the signal on the tracking
device. It’s simply due to the shielding effects of the metal compound of the
case.
3. The device should be ixed into position with cable ties or wide double-side tape.
Installation please refers to below picture.
- Under the dash board below
the front windshield;
- In the parcel shelf in the rear;
- In the front bumper (non-
material face), make sure the
device does not get wet;
- Under the wiper version (non-
metal), make sure the device
does not get wet;
- Non Covert Installation - ix the
device on the dash board
below windshield.
Under front windshield
Under rear windshield
Around dashboard
