Jinhua Unisky Tools TY-JSU3-B, Руководство пользователя

Страница: 13 / 21

13
axle(D) that comes supplied (Users of non-quick release bicycles can skip this step).
2.3 Install the bike on the bike trainer, adjust the screws of both sides to make the bike
tire roughly in the middle of the roller. After fixing the bike, Turn the lock nuts to the
innermost side, as shown in Figure 7.
2.4 Adjust the adjusting knob clockwise to make the roller tightly touch the tire, and then
tighten the adjusting knob for one to two more turns to make the roller fully fit the tire.
Step 3. Placing front wheel riser block
As shown in Figure 8, place the standard riser block right below the front wheel of the bike.
Step4. Trail operation
4.1 Confirm again that the bike is firmly installed and fixed, and the frame is fully fitted with
the ground without tilt.
4.2 When ready to ride, first peddle at a slow speed. If there is no any abnormality after
first step, then you can increase the speed.
Power training with Zwift
This electronic module is a part matching with the Cycling Trainer. It supports Bluetooth
Low Energy 4.0 protocol. Connect to the intelligent riding platform to obtain the data source
and enjoy the APP; The speed date in app is automatically calculated by APP according to
the power data and is not output by sensor.