JR Flexo Press Series
11
quantity of the printed material has reached the preset number or the multiplication of the
preset number, the machine will stop automatically. At this time when the machine needs to
be restarted, just press the “clear” key on the counter to make the number accumulated on
the counter reset to zero.
4. Stop button: The knob is marked red. When this knob is pressed, the printing motor
will stop.
5. Inching button: The knob is marked yellow. When this knob is pressed, the printing
motor will rotate slowly; when this knob is released, the printing motor will stop rotating.
This function is used for page correction or testing the stepping of the machine. When the
machine is in operation, press this knob and the printing motor will stop immediately.
6. Operation button: This knob is marked green. When this knob is pressed, and the
machine will begin to operate
7. Speed button: By turning this knob, stepped speed regulation of the printing motor
can be realized. When it is turned clockwise, the printing speed will increase; when it is
turned counterclockwise, the printing speed will be decrease.
8. Broken-band protection switch: when the material to be printed is used up, the
machine will stop automatically. This is done through a probe. When there is material to
block the probe, the machine will operate; when there is no material to block the probe, the
machine will stop.
9. Counter switch: When there is need to count the printed material, just press this
knob to “ON” position; when there is no need, press this knob to “OFF” position. And how
to counter printing label amount, means counter display figure multiply by fixed 609.6mm
for JR1231 4color, multiply by fixed 1219.2mm for JR1262 8colors.
10. Temperature control and display of the upper drying board: Temperature control I
is used for the temperature control of six-color group arranged in satellite form, and the 3
positive 1 negative types is used for the temperature control of 3 positive printing.
11. Electric switch of the upper drying board: When the 6 positive 2 negative type is
used only for the drying of two-color group, or the 3 positive 1 negative type is used only
for the drying of single-color group, the upper drying board can be switched off.
