Using the System
69
2.3.1.1
Access Code
The Access Code parameters are used to define those service activation or
deactivation from telephone set. Once the feature access code is accepted by the
system, the system will send SIP "180 ring" and user will hear ring back tone. If it is
rejected by the system, the will send "406 Not Acceptable" instead and user should
hear a busy tone. Click
Access Code
button below the
Office
modification screen.
The following screen will appeared.
Each access code filed are defined as following:
Parameter Name
Description
Enable Call Forward
Always
The access code to enable "Call Forward Always".
The default value is *01.
Dialing Rule: ACCEFORWARD_TEL or
ACCESS_CDOE (using the existing setting).
Disable Call Forward
Always
The access code to disable "Call Forward Always".
The default value is *02.
Dialing Rule: ACCESS_CODE.
Enable Call Forward No-
Answer
The access code to enable "Call forward" for no
answer. The default value is "*05".
Dialing Rule: ACCEFORWARD_TEL or
Содержание UniPBX-2000
