RF Thermostat
(Continued)
Problem
Corrective Actions
•
Check the programmed period start and finish times are correct
•
Check that AM or PM is correctly set
Fireplace comes on at the
wrong time
•
Check the programmed period temperature setting is correct
•
Check that °C or °F is correctly specified
Fireplace comes on at the
wrong temperature
•
Reset the time and day of the week as was required in the initial set
up. See page 16.
The time or day of the
week is incorrect
•
Once the default settings have been reset, the thermostat must be
reprogrammed. See page 16 for initial setup and page 18 for
programming the automatic mode.
Factory default settings
have been reset
•
Check that the batteries are in place correctly
•
Replace the batteries with new batteries and see if the thermostat
display appears
The thermostat won’t turn
on or the display is blank
•
The back light will only appear when the thermostat is on
The screen back light is
not working
•
Turn on Heater at ON/OFF button on front of Heater
The Thermostat has been turned on
but the Heater will not turn on
TROUBLESHOOTING
Derwent High Efficiency Gas Log Fire
24
