CAUTION: Wear safety glasses over your eye’s.
See JIMS
®
catalog for Hundreds of top quality professional tools.
The last tools you will ever need to buy.
IIn
ns
st
tr
ru
uc
ct
tiio
on
n S
Sh
he
ee
et
t F
Fo
or
r T
To
oo
ol
l #
#5
58
83
33
3
Rev N/C
7-19
No.5833-IS
9
9
555 Dawson Drive, Camarillo, CA 93012 Phone 805-482-6913 • Fax 805-482-7422
A Division of Thiessen Products, Inc.
Left Case (Crank Side) Bearing Plate Use:
WARNING:
DO NOT USE AIR POWERED OR IMPACT TOOLS WHILE INSTALLING
THE BALANCER BEARING OR INSTALLATION PLATE.
SEVERE CASE DAMAGE MAY RESULT.
Follow the procedures listed for RIGHT CASE BEARING PLATE USE with the following changes:
13. Insert the Dowel Pin
#1186-2000
into the appropriate case alignment hole in order to cor-
rectly align the installer plate. This is a slip fit. Do not force the Dowel Pin into the case align-
ment holes as this may result in damage to the case.
See Fig. 10.
14. Insert three 5/16 x 4” SHCS
#5833-5
from the bottom of the case up through the bearing
installer plate. Use a 5/16 AN Washer
#1216
on both sides as shown, securing each SHCS
with a nut
#1222
. This method will prevent cosmetic damage to the case.
See Fig. 11
(Next
page).
FIG.10
