Jigsaw provide the solution piece by piece
Feel the Future of Heating. Step out of the Shade and into the Sun
12
13
INSTALLATION ADVICE
SAFE INSTALLATION
800w, 1000w and 1500w wall bracket in the
vertical position
Fixing 400w, 800w, 1000w and 1500w bracket
mounting on wall with 350mm scredwriver
To ensure the brackets mount
correctly, draw a straight line with
a straight edge, spirit level or laser
level to align the fixing points for
the two brackets.
The bracket will not sit correctly
if the brackets are misaligned.
Remove the heater and raise or
lower the bracket causing the
issue. Rehang the heater and
attempt to lock the grub screws.
Check the measurements
between the brackets on the
heater if there is still an issue with
sitting the heater correctly. These
should match the measurements
on the wall.
Two people must be used to
install the 800w, 1000w and
1500w heaters.
Ensure that the correct fixings
have been used to fix the wall
brackets to the wall. Incorrect
fixings could cause damage
to the heater, people or
surrounding objects.
Grub Screw Advice - Remove
the heater and check the
measurements and aligment if
there is resistance in the screw, or
the screw fails to insert into the
bracket fully.
All grub screws must be fully
inserted to secure the heater
in the vertical position. Failure
to do so could cause damage
to the heater, people or
surrounding objects.
In the Horizontal position the
two outer retaining grub screws
must be used.
