Jidé s.a. – Rue des Meuneries 11 – B-4650 HERVE (Belgique) – Tél. +32 87 31.75.12 – Fax +32 87 31.75.11 –
PURE (EN) June 2018
14
Fitting of the chimney connection
Ensure the good seal of the connection. Your appliance is supplied with a short stainless steel
duct 45° right-angled for the chimney connection. It fits onto the appliance.
When the duct is placed on the appliance, fold back the 2 safety clamps.
Fitting of the connection for the convection air (option)
Your appliance has 2 hot air openings for the convection
1 Remove the disk
2
Fix the duct with three
self-boring screws
Devices without ventilation MUST have 2 hot air outlets with a finishing grid (not included).
These 2 hot air outlets must be plugged to at least 1 meter flexible diameter 125 mm.
