Jidé s.a. – Rue des Meuneries 11 – B-4650 HERVE (Belgique) – Tél. +32 87 31.75.12 – Fax +32 87 31.75.11 –
PURE (EN) June 2018
12
Sealed connection
To ensure a sealed connection, appropriate to the desired installation and the good
operation of your fireplace, please consult your installer who will give you with the necessary
information.
The section of the flue must be similar if possible to the one of the stove. If the section of the
flue is much more important than the one of the stove, it is advised to tube the chimney on
all its height and to insure the sealing of connection. It is necessary to be vigilant on the state
of the existing flue and more still on connection of the flexible device to the existing flue. A
bad connection can be the cause of disasters. Do use only pipes stainless appropriate to this
use.
It is mandatory to put from the device at least 1 m hard or flexible pipe, in steel or in stainless
steel, to connect the smoke exit.
The chimney must have a normal pulling i.e. that with its power maximum, the depression
will have to range between 12 and 20 Pa.
