Jidé s.a. – Rue des Meuneries 11 – B-4650 HERVE (Belgique) – Tél. +32 87 31.75.12 – Fax +32 87 31.75.11 –
NORDIC PLUS (EN) June 2018
29
Pay attention, if you replace the seal after having done this setting do not forget to adjust the eccentric to
the front of the device. Your dealer will be able to do this.
Eccentric for door
Twice a year, clean the hinge of the door, coat with a releasing oil in order to prevent
moisture penetrating and from blocking the axis of this one.
Cleaning the fan and the filter
It is necessary to supervise the state of cleanliness of the ventilators.
The accumulation of dust causes an unbalance of the turbine, which makes force the engine
which can burn or make noise.
Before any work, please disconnect the electricity supply.
The filter which protects the fan can be cleaned with lukewarm soapy water, or vacuumed.
It will be easier by removing the fans (see ventilation access above).
The fan can be dusted if it is fouled. Do not apply pressure to the fan blades, at the risk of
bending them and thus creating an imbalance that will lead to noise and vibrations.
These operations can be repeated during the year depending on the fouling.
Grease the axes.
Chimney-sweeping
With a concern for safety and observance of the applicable legislation, you must have the
chimney swept at least once per year, in order to limit the tar deposits in the chimney.
It is an opportunity to check the condition of the flue and connection of the chimney. It is
recommended first carefully removing the baffle then repositioning it in its initial position.
Vacuum three or four times per year the residues above the baffle.
