Changchun Jida Scola Co.,Ltd Boyi III Electronic Whiteboard Instraction Manual
- 9 -
Names and Functions of Various Parts
Receiver
Since the receiver is an important part of the product, please take care in application to avoid falling or
collision.
There is a magnet at the bottom of the Boyi III’s receiver, it can be attached on the metal panel; while using
on the non metal surface, please use our metal fixed plate.
Logo of Boyi III is a device working status indicator.
Fixing position of receiver
The fixing position of receiver directly affects the normal working of the electronic pen. Please refer to the
Diagram of Correct Installation Position in the right column to select the installation position for the
receiver.
1.
Adjust the projector, make the projected area a normal rectangle. The maximum of the projected
area is 1.2x1.8m. ( please refer the manual of projector and this manual of setting the projector on
page 16.)
2.
The distance of the sensor of the receiver and the projected area is 6cm.
3.
The receiver is fixed vertically to the middle of the left of the projected area.
Color of
indicator
Status of receiver
Connection
Working
Red
Unsuccessful
Electronic pen
is not working
or out of the
working area
Green
Successful
Electronic pen
is working
normally in
the working
area
