Jiaxing Harley Baby Car HL228, Инструкция по эксплуатации

Страница: 21 / 23

CLEANING AND MAINTENANCE OF THE PRODUCT
 Cleaning:
1.Do not clean the product with a hose. Do not wash it with water and soap. Do not use the jeep, when it rains or snows.
Water may damage the motor, electric system or battery.
2.Clean the battery operated jeep with soft, dry cloth only. In order to restore the shine of the plastic parts, use polishing
agent for furniture
WITHOUT wax. Do not use strong abrasive cleaning agents.
 Maintenance and storage:
1. The responsibility to check the main parts of the toy before use is entirely to the parents/ adult. Regularly check for
potential risk of damage / injury – the battery, adapter, electric cables or wires, bushings, screws, body, moving systems,
wheels, fastening components – whether they are in good working condition or not, whether there is any damage, broken or
chipped parts.
WARNING!
•Before you start charging the product you must check whether the adapter, battery and cables are in good working order. If
there is damage on any of these parts, you must stop using them, until the damage is removed.
• Do not let the battery discharge entirely. You must recharge it after each use or once a month if you are not going to use it
regularly.
• Do no turn the battery backwards.
• Always secure and fasten the rechargeable battery with the bracket. Otherwise the battery can fall and injure the child, if
the battery operated jeep upturns.
• It is normal for the adapter to get heated during charging, but if the adapter gets very hot, you must stop the charging and
check the adapter and battery.
• Before you put the battery operated jeep in storage, you must charge its battery completely. After that every 3 months you
must charge it, in order to prolong its life.
•Children are not allowed to handle the adapter. Only an adult must handle it. After charging you must always store it at a
place out of the reach of children. The adapter is not a toy.
1.Switch the POWER BUTTON OFF before charging.
2.The charger port is located near the seat . SEE FIGURE C.
3.Connect the charger plug to the charger port of the car.
4.Then connect the charger to a socket of the main electric grid.
5.During charging the battery operated jeep cannot be used.
6.Before use for the first time, you must charge the battery for 12 hours. Do not charge the battery for more than 24 hours, in
order to avoid overheating of the adapter.
7.When the battery operated jeep starts moving more slowly, you must recharge the battery.
8.After each use or at least once a month you must recharge the rechargeable battery between 8 and 12 hours, but less
than 24 hours.
REMOVAL OF THE DISCHARGED BATTERY
Your battery at one point will lose its ability to hold charge. Depending on the amount of use and varying conditions, the
battery should be used between one and three years. In order to replace the battery and remove the discharged one, follow
the steps below:
1. Remove the seat of the battery operated jeep.
2. Remove the jacks of the battery’s cables.
3. Remove the metal bracket that protects the battery from falling.
4. Remove the lid of the battery compartment.
5. Carefully lift the battery.
• Depending on the state of the battery (for example leakage) you may have to wear protective gloves before you
remove the battery.
• Do not lift the battery by its terminals or cables.
6. Place the discharged battery in a plastic packaging.
Important! The sealed lead-acid battery must be recycled or thrown away in an ecologically friendly manner for the purpose
of avoiding pollution of the environment. The battery contains lead acid (electrolyte) and must be discarded in an ecologically
friendly manner in accordance with the regulatory requirements. DO NOT throw the rechargeable battery in fire, because it
may explode or leak. DO NOT throw the lead-acid battery in the containers for household waste. The incineration (burning),
land filling or mixing of the sealed lead-acid batteries with the household waste is forbidden by law. The discharged
rechargeable battery can be given at the local recycling center for recycling or at a center for sale of such batteries.
7. Replace the battery with new one and reconnect all cables and terminals.
8. Place the metal bracket protecting the battery from upturning or falling back on.
9. Return the seat of the battery operated jeep back in place.
20