小牛电动
Niu Electric
- 43 -
Installation
Install the rear brake disc and motor assembly.
Install the rear hydraulic brake pad assembly.
Install the rear brake hose assembly and brake cylinder assembly.
Install the oil pump body assembly and switch assembly.
Do not make the grease adhere to the rear hydraulic brake pad assembly and brake disc.
tightening bolts on the front shock absorber assembly:
Self-locking nuts on the motor
60-80 N·m
There should be no oil stains on the brake pad.
Oil stains on the brake pad should
be cleaned off with the brake detergent solution.
Rear brake:
1. Bolt M6X30
7. Brake shoe assembly
2. Rear brake rocker assembly
8. Brake shoe sprin
3. Nut M6
9. Vacuum tire 120/70-12
4. Rear rim assembly 12×3.5
5. Self-locking nuts on the rear wheel
6. Camshaft on the rear brake
* Note
Oil stains on the brake shoe pad will result in reduction of the brake performance.
Содержание N1S
Страница 12: ...Niu Electric 9 Scooter body scooter body panel...
Страница 34: ...Niu Electric 31 Rear wheel rear suspension Preparation Failure diagnosis Motor Rear shock absorber...
Страница 57: ...Niu Electric 54 The prompt window will appear when the writing is completed as shown in the figure...
Страница 101: ...Niu Electric 98...