2
3
4
5
1
Attach the Rear Wheels
│
6
2WD
Driving Wheel
Rear axle
1. Slide the
gear box
onto the
rear axle.
“R” labeled gear box should be fit to the
“R” side of vehicle body; “L” labeled gear box should be fit to “L” side of vehicle
body.
Keep the
motor
and the
connector
on the gear box through the larger
hole on the rear vehicle and out where the battery sits.
2. Slide the
driving wheel
onto the rear axle. And keep the
driving wheel
match
with the
gear box
.
3. Slide the
Ø12 Washer
onto the
rear axle
.
4. Tighten a
Lock nut
to the end of the
rear axle
with a spanner.
HINT: An extra
spanner has been provided to hold the Lock Nut on the other side of the
rear alxe while tightening the Lock Nut on the other side.
Repeat the above procedure to assemble the other driving wheel.
5. Fit the
hubcaps
to the wheel cover.
