2
3
4
10
7
6
5
1
HINT: If your vehicle is
Two Wheels Driving Type
, see the next page please.
8
9
10
Attach the Rear Wheels
│
4
Driving Wheel
Normal Wheel
1WD
Rear axle
1. Slide the
gear box
onto the
rear axle
(Left Side).
Keep the
motor
and the
connector
on
the gear box through the larger hole on the rear vehicle and out where the battery sits.
2. Slide the
driving wheel
onto the rear axle. And keep the
driving wheel
match with the
gear box
.
3. Slide the
Ø12 Washer
onto the
rear axle
.
4. Tighten a
Lock nut
to the end of the
rear axle
with a spanner.
5. Slide the
Ø12 Washer
onto the
rear axle
(Right Side)
.
6. Insert the bush into the hole in the center of the normal wheel.
7. Slide the
Normal wheel
onto the rear axle.
8. Slide the
Ø12 Washer
onto the
rear axle
.
9. Tighten a
Lock nut
to the end of the
rear axle
with a spanner.
HINT: An extra
spanner has been provided to hold the Lock Nut on the other side of the rear
alxe while tightening the Lock Nut on the other side.
10. Fit the
hubcaps
to the wheel cover.
