JHCTech BRAV-7501, Руководство пользователя

Страница: 18 / 56

User’s Manual
10
If you encounter the followings
a) CMOS data becomes corrupted.
b) You forget the supervisor or user password.
you can reconfigure the system with the default values stored in the ROM BIOS.
To load the default values stored in the ROM BIOS, please follow the steps below.
1. Power-off the system and unplug the power cord.
2. Set CMOS pins 2 and 3 to On. Wait for a few seconds and set CMOS back to its default setting,
pins 1 and 2 On.
3. Now plug the power cord and power-on the system.
2.2.2 ATX- AT/ATX Power on mode selection
Figure 2. 2
The BRAV-7501 provides a AT/ATX jumper, which users can set Power-on mode by it. When you set
pins 2 and 3 on, it means power on by AC Power; When you set pins 1 and 2 on, it means power on by
Power button.