JHCTech ALAD-A1001T Скачать руководство пользователя

Страница: 3 / 36

Copyright

The documentation and the software included with this product are copy- righted 2017 by Shenzhen JHC

Technology Co., Ltd. All rights are reserved. Shenzhen JHC Technology Co., Ltd. reserves the right to

make improvements in the products described in this manual at any time without notice. No part of this

manual may be reproduced, copied, translated or transmitted in any form or by any means without the

prior written permission of Shenzhen JHC Technology Co., Ltd. Information provided in this manual is

intended to be accurate and reliable. However, Shenzhen JHC Technology Co., Ltd. assumes no

responsibility for its use, nor for any infringements of the rights of third parties, which may result from its

use.

Acknowledgements

Award is a trademark of Award Software International, Inc.

IBM, PC/AT, PS/2 and VGA are trademarks of International Business Machines Corporation.

Intel and Pentium are trademarks of Intel Corporation.

Microsoft Windows and MS-DOS are registered trademarks of Microsoft Corp.

RTL is a trademark of Realtek Semi-Conductor Co., Ltd.

All other product names or trademarks are properties of their respective owners.

For more information on this and other JHC products, please visit our websites at:

http://www.jhctech.com.cn

Содержание ALAD-A1001T





































Результаты поиска

Содержание ALAD-A1001T

Отзывы:

Похожие инструкции для ALAD-A1001T

Бренды по названию

Популярные бренды

JHCTech ALAD-A1001T, Руководство пользователя

Результаты поиска

Содержание ALAD-A1001T

Отзывы:

Похожие инструкции для ALAD-A1001T

Бренды по названию

Популярные бренды