JHCOOL JH168, Руководство пользователя, Страница: 9 / 12

Page | 9
3. COOL: Switch to cool mode.
4. Reserved.
5. SWING: Start or stop swing.
6. TIMER: Start timing function.
7. Reserved.
Operating introduction
Please ensure the power lines are connected correctly before using!
1) ON/OFF
Press this button under the state of stand-by, then it will start running. The mode
and the airflow will be the same as the last state when you power off it. The speed
is at 2 speed and the cool function is ON when you power it at first time. The airflow
will be showed at the range of L, M, H from left to right dynamically.
Press this button while the cooler is operation, it will stop and only the temperature
will be showed on it.
2) Airflow adjustable
Press “SPEED” button on the LCD controller or “SPEED” on the remote controller
to add or decrease it. It can be changed from L-M-H-L-M-H… and that will be
showed on the “airflow indicator”
3) Mode
Press “COOL” button on the LCD controller, the mode will be changed by COOL-
VENTILATION-COOL…
When the cooler is start or operating, switch to COOL mode, it will be forced to run
for 30s in the lowest speed and then come back to the speed you have set before,
it will not affect the speed displays on the remote LED screen.
4) SWING
The “SWING” button will be lighted on when pressing the “swing” button on the
LCD controller or remote controller, it controls the switch of swing function.
5) TIMER
“Timer” set to start or stop the air cooler automatically after N hours later. It is set