JGC TCD-629, Руководство пользователя, Страница: 21 / 24

Client: Rewe
Project: JGC-TCD-629
Language: EN
Date: 02.07.2007
Version: 03
Page:
2 (of 24 pages)
Barcode: 400 5000 0 000 8 00077
Engl
ISH
1
radio
This appliance can receive AM, SW (SW, SW2), or FM frequency radio.
• Switch fUnCTIOn (5) to raDIO. The display (6) shows (53).
• Switch banD (8) to the desired frequency band (Mw, Sw1, Sw2, fM).
• Tune into the desired station with TUnIng (25).
• With the FM frequency band the fM ST (47) indicator lights up if a radio station with a stereo signal is received.
• Adjust the position of the wire antenna (45) for FM reception or the appliance for SW and AM reception.
ClEanIng anD MaInTEnanCE
Cleaning the appliance
• Use a damp cloth and mild soap solution to clean the surface of the appliance.
• Do not use aggressive or abrasive cleansers, benzines, solvents, or chemically treated cleaning cloths. These might damage the appliance.
notes for discs
• Do not touch the surface of a disc and do not stick labels on it.
• Do not expose the disc to direct sunlight or extreme temperatures.
• If the disc contains fingerprints or dust, wipe it carefully with a soft cloth starting from the centre. Do not use antistatic or other cleanser to clean
the disc.
Maintenance of the cassette deck
Clean the pinch wheel (a) and the audio head (C) approx. every 0 working hours or once a month.
• For cleaning, open the cassette deck (18, 32) with (20, 27).
• Use a cotton bud moist with alcohol to clean the pinch wheel and the magnetic audio head
• Press (23, 30) to reach the audio head with the cotton bud.
• Press (19, 26) to make the pinch wheel (a) movable for cleaning..
• Clean the capstan (b).
• Carefully clean these parts with the cotton bud.
• Alternatively, you can use a cleaning cassette. Play it entirely.
note: Ensure not to damage any parts inside the cassette decks. Do not use screwdrivers or any other sharp objects.
Troubleshooting
Problem Reason Solution
Appliance does not
switch on. Power cord is not correctly connected. Check if the power cord is correctly connected.
No sound or sound
problems. Volume level is to low.
Speaker wire (42, 46) damaged.
Inserted disc dirty or scratched.
Inserted MP3 disc is not compatible.
MUTE function is activated.
Increase volume level.
Check if the speaker wires are damaged.
Clean the disc with a soft cloth or insert another disc.
Insert another MP3 disc with compatible files.
Press MUTE (67), vOl + (68) or vOl – (75) to switch on
the volume.
Poor FM reception or no
stereo. Wire antenna (45) covered. Adjust the position of the wire antenna (45) to improve the
reception quality.
Poor AM reception. Appliance is in a bad position for reception. Change the position of the appliance or displace it.
CD player does not
operate. No disc is inserted.
Disc is incorrectly inserted.
Condensation on the CD player lens
Ensure that a disc is inserted.
Ensure the disc is inserted with the printed side up.
Do not insert a disc; leaving the appliance powered-off for an
hour before use.
Remote control does not
operate. Items situated between remote control and
appliance.
Batteries incorrectly inserted.
Batteries empty
Always direct the remote control towards the appliance.
Check if the batteries are correctly inserted (mind the
polarity).
Replace the batteries.
OPEraTIOn/ClEanIng anD MaInTEnanCE
A B C