JGC MS450-3CD, Руководство пользователя

Страница: 22 / 32

BASIC OPERATION
21
ENGLISH
TIME SETTING
Time setting is only possible during standby mode
1.
Press MEM/CLOCK, button, hour display starts to blink
.
2. Press CD//- button for HOUR setting ,then press MEM/CLOCK button to store.
3. Press CD//- button for MINUTES setting now, and press MEM/CLOCK button to store.
TIMER SETTING
1. Press MODE button to display the time.
2. Press MODE button again to display power-on time (indicated by
ON ).
3. Press MEM/CLOCK to enter setting mode. Use SKIP+/- buttons to
set power-on hour. Press MEM/CLOCK and use SKIP+/- buttons to
set power-on minutes. Press MEM/CLOCK button to exit setting and
store.
4. Press MODE button to display power-off time (indicated by OFF) .
5. Repeat step 3 to set the power-off time.
6. Press MODE button to display the power-on source.
7. Press MEM/CLOCK and use SKIP+/- buttons to select the power-on
source. Press MEM/CLOCK button to exit setting and store.
8. Switch the system to standby mode. When reaching the preset time, the selected source will play
and switch off again at the preset time.
Active timer is indicated by showing on the display.
NOTE:
•
The timer setting will automatically cancelled if no button is being pressed for more than 10
Seconds.
• If the selected source CD is not available when activated by timer, TUNER will be selected
automatically instead..
DEACTIVATE THE TIMER
•
Press
TIMER
button to deactivate this function, will disappear on the display. To activate the
timer again with the preset time, press the TIME button again.
•
To cancel active timer until next day, press the
STANDBY/ON
button.
SLEEP TIMER:
SLEEP mode is set on or off by pressing the
SLEEP
button is pressed on the remote handset. Press and
hold the SLEEP button to change the SLEEP timer to 90, 80, 70, 60, 50, 40, 30, 20 and 10 minutes
backwards in 10-minute steps. Active sleep timer is indicated by
SLEEP in the display