JF 5D, Руководство по эксплуатации и техническому обслуживанию

Страница: 21 / 76

21
OPERATION TECHNICAL MANUAL - MILL 5D - 10D
6- Step by step operation
6.1- Operating the machine in grain chopper
mode
a) VERY IMPORTANT: See the instructions of the item
"Motor mounting on the easel" to start the engine properly.
b) Place the grains on the chopper (1).
Adjust the grains flow according item ¨g¨ of page 19.
Attention: Respect the working capacity of the
machine. Avoid grains overload.
The desintegrated product will flow through the lower
outlet (2).
Note:
Adjust the amount of product flow through the outlet (2) by
the plate (3), according necessary.
2
3
1
3
6.2- Operating the machine in forage chopper
mode
2
3
1
a) Park the machine correctly, so that the product jet is
thrown for the right direction through the upper outlet (1).
b) Adjust the deflector position (2) according instructions
on item ¨f¨ of page 20.
c) VERY IMPORTANT: See the instructions of the item
"Motor mounting on the easel" to start the engine properly.
d) Put the product on feeding nozzle (3) on continuous
way as possible and in quantity compatible with the
machine and feeding nozzle capacity.
E
n
g
li
s
h