JEWELL 781, Руководство пользователя

Страница: 12 / 13

B-88-1006, REV. B 11
Scale Factors are determined by moving the transducers through a range of angles and
recording the SCU output at each angle. Linear regression analysis then determines the slope
of the straight line that best fits the data. This slope is the Scale Factor. Reported below are
Scale Factors and their corresponding maximum nonlinearity.
Note : Differential Scale Factors are double single-ended Scale Factors when expressed as
volts per angular change. When Scale Factors are expressed as angular change per volt,
differential Scale Factors are one
half single- ended Scale Factors.
SCU serial number: ____________
Calibration range units: ____________
Scale Factor units: ____________
"SENSOR 1" CHANNEL
Transducer
Serial No.
Calib.
Temp.
°F
Calib. Range, ± Scale Factors
Single-
ended
Differential
High
Gain Low
Gain
High
Gain Max.
Nonlinearity
Low
Gain
Max.
Nonlinearity
"SENSOR 2" CHANNEL
Transducer
Serial No.
Calib.
Temp.
°F
Calib. Range, ± Scale Factors
Single-
ended
Differential
High
Gain Low
Gain
High
Gain Max.
Nonlinearity
Low
Gain
Max.
Nonlinearity
Max. Nonlinearity = % of full calibration span.
The Scale Factor of the temperature output is 0.1°C/mV.