34
only available if there is Hardware Monitor onboard.
CMOS Setup Utility – Copyright(C) 1984-2003 Award Software
PC Health Status
Item Help
Current Fan 1 Speed 4964 RPM
Current Fan 2 Speed 0 RPM
CPU Vcore 1.450V
3.3V 3.208V
+12V 12.256V
Internal VCC 3.200V
Menu Level >
↑↓→←
Move Enter:Select Item +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Optimized Defaults F7:Standard Defaults
Current FAN1, FAN2 Speed/CPU Vcore/3.3V/+12V/Internal VCC
This will show the CPU/FAN/System voltage chart and FAN Speed.
3-11 Miscellaneous Control
This section is for setting CPU Miscellaneous Control.
CMOS Setup Utility – Copyright(C) 1984-2003 Award Software
Miscellaneous Control
Item Help
VIA C3 Clock Ratio Default
Intel CPU Ratio Default
Auto Detect DIMM/PCI Clk Enabled
Spread Spectrum Disabled
** Current Host/PCI Clock is 133/133 MHz **
Host/PCI Clock at Next Boot is 133/33MHz
** Current DRAM Clock is 133MHz **
DRAM Clock at Next Boot is 133MHz
+2.5V Select 2.55V
Menu Level >
↑↓→←
Move Enter:Select Item +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Optimized Defaults F7:Standard Defaults
Auto Detect DIMM/PCI Clk
This item allows you to enable/disable auto detect DIMM/PCI Clock.
The settings are: Enabled, Disabled.
Spread Spectrum
This item allows you to set the Spread Spectrum.
Host/PCI Clock at Next Boot is
This item allows you to select the CPU/PCI Clock, refer to
Page 10
.
By press PageDown/PageUp key you can change the CPU Host/PCI Clock
When jumper setting CPU Host Clock 66MHz you can choose 66/33
∼
99/49MHz
When jumper setting CPU Host Clock 100MHz you can choose 100/33
∼
132/44MHz
When jumper setting CPU Host Clock 133MHz you can choose 133/33
∼
200/50MHz
CPU Clock Ratio
This item allows you to select the CPU ratio.
3-12 Load Standard/Optimized Defaults
Load Standard Defaults