7
(3) CMOS RAM Clear (3-pin): JP5
A battery must be used to retain the motherboard configuration in CMOS RAM short 1-2
pins of JP5 to store the CMOS data.
To clear the CMOS, follow the procedure below:
1. Turn off the system and unplug the AC power
2. Remove ATX power cable from ATX power connector
3. Locate JP5 and short pins 2-3 for a few seconds
4. Return JP5 to its normal setting by shorting pins 1-2
5. Connect ATX power cable back to ATX power connector
Note: When should clear CMOS
1. Troubleshooting
2. Forget
password
3. After over clocking system boot fail
CMOS RAM Clear Setting
2-3 closed Clear CMOS
JP5
1
3
JP5
1
3
1-2 closed Normal (Default)
(4) On board Sound Chip (3-pin): JP7
On Board Sound Chip Setting
2-3 closed Sound Enabled (Default)
JP7
1
3
JP7
1
3
1-2 closed Sound Disable
2-3 Install CPU
2-3-1
Glossary
Chipset (core logic)
- two or more integrated circuits which control the interfaces between the
system processor, RAM, I/O devises, and adapter cards.
Processor socket
- the socket used to mount the system processor on the motherboard.
Slot
(AGP, PCI, ISA, RAM) - the slots used to mount adapter cards and system RAM.
AGP
-
A
ccelerated
G
raphics
P
ort - a high speed interface for video cards; runs at 1X
(66MHz), 2X (133MHz), or 4X (266MHz).
