background image

 
 
 
                                                                                                                                                                                                                                                                                                                                                             

 
 
 

 

15

Chapter 5 

Thunder Protection Feature 

Introduction: 

Thunder is such formidable natural force that it can render massive damage to electronic 
products of all kinds. In thunderstorm season computer systems without powerful thunder 
protection designs are vulnerable to electric surge damage. High-priced building with 
thunder protection measures may be a good choice, but usually costly and with corners 
uncovered. The best solution for both cybercafés owner and common users would be 
Thunder Series motherboards.   

Thunder Protection Technology from Thunder Series Motherboard 

Thunder series motherboards are integrated with double thunder-protection walls, one from 
network port and the other from LAN chip. When it thunders, the first thunder-protection wall 
will analyze and recognize thunder surge in network cable and transfer it to ground wire area. 
The second thunder-protection wall will protect against any residual electric current or 
runaway electrons to ensure safety of network card and other components of the 
motherboard. 
Laboratory test statistics on IEC61000-4-5 (1.2-50us) standardized thunder electric surge 
tests have verified that Thunder series motherboard can endure up to 9KV electric surge 
and protect the system from possible thunder damage. 

IEC61000-4-5 (1.2-50us) Standardized Thunder Electric Surge Laboratory Test       

 Medium rise time: T1=1.2us±30%, T2=50us±30%  

  

 

Test1:

 Current Partial Discharge tests on Thunder Series Motherboards with double 

Thunder-protection Walls. 

Test Result:

 Each MB can endure up to 9KV voltage of electric surge. Some motherboards 

will restart (mostly depends on LAN chip), but no damage occurs to motherboards or 
components of the board. System works normally after a restart. 

Test2

: Current Partial Discharge tests on Motherboards without Thunder-protection function 

Test Result:

 LAN chips are damaged when testing voltage reached to 5KV. System fails to 

operate normally (in most cases systems can not access to network) after a restart. 

Conclusion:

 Thunder Series motherboard can guard motherboard from thunder electric 

surge damage with effect and ensure system security from as high as 9KV volts of electric 
surge. 

Bonus of Thunder-protection Motherboard 

Thunder series motherboards adopt dual thunder protection walls to cover every 
corner in network loops. Such a complete thunder protection provided to users, 
especially cybercaf

é

s means less repair cost and more effective business time. 

Thunder series can guard system stability with effect. With Thunder series 
motherboards, together with reasonable disposal of electric wires, proper placing of 
electric devices, piped network cables and other necessary thunder protection 
devices, your computer system will be intact in thunderstorm weather.

 

Содержание TIH77MG7



















Отзывы: