26
(8) FAN Headers (3-pin) : SFAN1, SFAN2, CPUFAN
These connectors support cooling fans of 350mA (4.2 Watts) or less, depending on the
fan manufacturer, the wire and plug may be different. The red wire should be positive,
while the black should be ground. Connect the fan’s plug to the board taking into
consideration the polarity of connector.
SFAN1
1
3
CPUFAN
1
3
SFAN2
1
3
(9) CD Audio-In Headers (4-pin) : CDIN
CDIN are the connectors for CD-Audio Input signal. Please connect it to CD-ROM
CD-Audio output connector.
CD Audio-In Headers
CDIN
4
1
(10) COM2 Serial Port Headers (9-pin) : COM2
This board has one serial port header COM2, it come with cable providing serial port
COM2. The On-board serial port can be disabled through BIOS SETUP. Please refer to
Chapter 3 “INTEGRATED PERIPHERALS SETUP“ section for more detail information.
COM2
Pin 1
Note: Orient the read marking on the
COM2 ribbon cable to pin 1
