30
Press [Enter] to make further settings for Graphics Configuration.
Graphics Configuration
Primary IGFX Boot Display
Use this item to select the video device which will be activated during POST. This
has no effect if external graphics present. Secondary boot display selection will
appear based on your selection. VGA modes will be supported only on primary
display.
The optional settings are: [VBIOS Default]; [CRT]; [HDMI]; [DVI]; [Display Port].
*When set as [CRT]; [HDMI]; [DVI] or [Display Port], the following sub-item shall
appear:
Secondary IGFX Boot Display
The optional settings are: [Disabled]; [CRT]; [HDMI]; [DVI]; [Display Port].
Primary Display
Use this item to select which of IGFX/PEG/PCI graphics device should be primary
display or select SG for switchable GFX.
The optional settings are: [Auto]; [IGFX]; [PEG]; [PCI].
Internal Graphics
The optional settings are: [Auto]; [Disabled]; [Enabled].
Aperture Size
The optional settings are: [128MB]; [256MB]; [512MB].
DVMT Pre-Allocated
Use this item to select DVMT 5.0 pre-allocated (fixed) graphics memory size used
by the internal graphics device.
The optional settings are: [32M]; [64M]; [128M]; [256M]; [512M]; [1024M].
DVMT Total Gfx Mem
Use this item to select DVMT 5.0 total graphics memory size used by the internal
graphics device.
The optional settings are: [128M]; [256M]; [MAX].
PEG Configuration
Press [Enter] to make settings for the following sub-items:
PEG Slot Configuration
PEG-Gen X
The optional settings are: [Auto]; [Gen1]; [Gen2]; [Gen3].
Enable PEG
The optional settings are: [Disabled]; [Enabled]; [Auto].
Detect Non-Compliance Device
Use this item to detect non-compliance PCI Express device in PEG.
The optional settings are: [Disabled]; [Enabled].
Program PCIe ASPM after OpROM
The optional settings are: [Enabled]; [Disabled].
[Enabled]:
PCIe ASPM will be programmed after OpROM.
[Disabled]:
PCIe ASPM will be programmed before OpROM.
PEG De-emphasis Control
Use this item to configure the De-emphasis control on PEG.
The optional settings are: [-6 dB]; [-3.5 dB].
PEG ASPM
Use this item to control ASPM support for the PEG device. This has no effect if
