JETWAY NF9G-QM77, Техническое руководство

Страница: 48 / 49

43
Launch EFI Shell from file system device
This item is for attempts to launch EFI shell application (Shell x64.efi) from one of the
available filesystem devices.
Appendix
How to set CN1, CN2 add-on card to run PCIE X1 or PCIE X4 mode:
User can purchase compatible add-on card to install on CN1 & CN2 header for
function expansion (e.g. ADE4NV13M). When installing such add-on cards, user
needs to pay attention to the following points:
1.
PCIE add-on card run in PCIE X1 or PCIE X4 mode (e.g. ADE4NV13M run in
PEIE X 4 mode). Please make sure of the running mode of compatible add-on
card before installation.
2.
As default BIOS setting, CN 1 & CN2 headers on NF9G board support only PCIE
X1 mode; user can enter BIOS to check CN 1 & CN2 PCIE running mode:
3.
If the add-on board you purchase run in PCIE X1 mode, you can install it on the
board without the following further settings;
4.
If the add-on board you purchase run in PCIE X4 mode, you need to visit our
official web site and go to ‘NF9G’ page and to download the file
‘
NF9G_PCIEX4SET.rar’, uncompress the file and execute ‘X4.BAT’ to change
BIOS settings for the card to run in PCIE X4 mode;