JETWAY NF792I Series Скачать руководство пользователя страница 39 | Manualshive

Страница: 39 / 48

JETWAY NF792I Series Скачать руководство пользователя страница 39

34

Media Detect Count
Use this item to set number of times presence of media will be checked.
The optional settings range from [1] to [50].



CSM Configuration

Press [Enter] to make settings for the following sub-items:
Compatibility Support Module Configuration
Boot Option Filter
This item controls Legacy/UEFI ROMs priority.
The optional settings are: [UEFI and Legacy]; [Legacy only]; [UEFI only].
Network
This item controls the execution of UEFI and legacy PXE OpROM.
The optional settings are: [Do not launch]; [UEFI]; [Legacy].
Storage
This item controls the execution of UEFI and Legacy Storage OpROM.
The optional settings are: [Do not launch]; [UEFI]; [Legacy].
Other PCI devices
This  item  determines  OpROM  execution  policy  for  devices  other  than  Network,
storage or video.
The optional settings are: [Do not launch]; [UEFI]; [Legacy].



Wake-up Function Settings

Press [Enter] to make settings for the following sub-items:
Wake-up System with Fixed Time
Use this item to enable or disable system wake-up by RTC alarm.
The optional settings: [Disabled]; [Enabled].
When set as [Enabled], system will wake on the hour/minute/second specified.
Wake-up System with Dynamic Time
Use this item to enable or disable system wake-up by RTC alarm.
The optional settings: [Disabled]; [Enabled].
When  set  as  [Enabled],  system  will  wake  on  the  current  time  +  increased
minute(s).The settings range is from [1] ~ [60] minute(s).
USB Wake-Up from S3-S4

«
...
37
38
39
40
41
...
»

Содержание NF792I Series

















































Отзывы:

Нет отзывов