25
Wake-up System with Dynamic Time
Use this item to enable or disable system wake on alarm event.
System will wake on the current time + Increase minutes.
The optional settings: [Disabled]; [Enabled].
When set as [Enabled], system will wake on the current time + increased
minute(s).
PS2(S3-S5) / USB(S3-S4)Wake-up
Use this item to enable or disable USB Wake-up from S3-S4 and PS/2 device
wake up from S3-S5.
USB S5 Power
Use this item to enable or disable USB power after power shutdown.
* Note: This function is supported when ‘ERP Support’ is set as [Disabled].
Super I/O Configuration
Press [Enter] to make settings for the following sub-items:
Super IO Configuration
ERP Support
The optional settings: [Disabled]; [Auto].
This item should be set as [
Disabled
] if you wish to have all active wake-up
functions.
►
Serial Port 1 Configuration
Press [Enter] to make settings for the following items:
Serial Port
Use this item to enable or disable serial port (COM).
Change Settings
Use this item to select an optimal setting for super IO device.
The optional settings are: [IO=3F8h; IRQ=4]; [IO=3F8h; IRQ=3,4,5,6,7,
9,10,11,12]; [IO=2F8h; IRQ=3,4,5,6,7, 9,10,11,12]; [IO=3E8h; IRQ=3,4,5,6,7,
9,10,11,12]; [IO=2E8h; IRQ=3,4,5,6,7,9,10,11,12].
Serial Port FIF0 Mode
The optional settings are: [16-Byte FIF0]; [32-Byte FIF0]; [64-Byte FIF0]; [128-Byte
