33
DVMT Total Gfx Mem
Use this item to select DVMT 5.0 total graphics memory size used by the internal
graphics device.
The optional settings are: [256M]; [128M]; [MAX].
Primary IGFX Boot Display
Use this item to select the video device which will be activated during POST. This
has no effect if external graphics present. Secondary boot display selection will
appear based on your selection.
The optional settings are: [VBIOS Default]; [HDMI]; [VGA].
* Note
: When set as [HDMI] or
[VGA]
, user can make further settings in
‘
Second
IGFX Boot Display
’.
Second IGFX Boot Display
Use this item to select secondary IGFX boot device.
The optional settings are: [Disabled]; [HDMI] or [Disabled]; [VGA] depends on
Primary IGFX Boot Display setting.
►
PEG Port Configuration
Press [Enter] to make settings for the following sub-items:
Max Link Speed
Use this item to configure PEG 0:1:0 Max Speed.
The optional settings are: [Auto]; [Gen1]; [Gen2]; [Gen3].
►
Memory Configuration
Press [Enter] to view brief information for the working memory module.
►
PCH-IO Configuration
Press [Enter] to make settings for the following sub-items:
USB Controller
The optional settings are: [Disabled]; [Enabled].
Use this item to enable or disable the USB physical connector. Once disabled, any
USB devices plugged into the connector will not be detected by BIOS or OS.
HD Audio
The optional settings are: [Disabled]; [Enabled]; [Auto].
Onboard Lan1 Controller
Use this item to enable or disable onboard NIC.
When set as [Enabled], user can make further settings in
‘
Wake on LAN1
’ item:
Wake on LAN1
Use this item to enable or disable integrated LAN to wake the system.
The optional settings are: [Enabled]; [Disabled].
Onboard Lan2 Controller
Use this item to enable or disable onboard NIC2.
The optional settings are: [Enabled]; [Disabled].
System State After Power Failure
Use this item to specify what state to go to when power re-applied after a power
failure (G3 state).
The optional settings are: [Always On]; [Always Off]; [Former State].
