27
►
Third Super IO Configuration
►
COM7/COM8/COM9/COM10 Configuration
Serial Port
Use this item to enable or Disable serial port (COM).
Change Settings
Use this item to select an optimal setting for super IO device.
►
WatchDog Configuration
Press [Enter] to make settings for Watchdog Configuration:
Watchdog Configuration:
WatchDog Timer Control
Use this item to enable or disable WatchDog Timer Control. When set as
[Enabled], the following sub-items shall appear:
WatchDog Timer Val
User can set a value in the range of 4 to 255.
WatchDog Timer Unit
The optional settings are: [Second];[Minute].
►
Shutdown Temperature Configuration
Use this item to select system shutdown temperature.
The optional settings are: [Disabled]; [70 C/158 F]; [75 C/167 F]; [80 C/176 F]; [85
C/185 F].
►
SmartFan Configuration
Press [Enter] to make settings for SmartFan Configuration:
CPUFAN 3/4 Pin Fan Select
The optional settings are: [3 pin]/ [4 pin].
SYSFAN1 3/4 Pin Fan Select
The optional settings are: [3 pin]/ [4 pin].
SYSFAN2 3/4 Pin Fan Select
The optional settings are: [3 pin]/ [4 pin].
CPUFAN / SYSFAN1/ SYSFAN2 Smart Mode
When set as [Enabled], the following sub-items shall appear:
CPUFAN / SYSFAN1/ SYSFAN2 Full Speed Temp
Use this item to set CPUFAN/SYSFAN1/SYSFAN2 full speed temp. Fan will run at
full speed when above this temperature.
CPUFAN / SYSFAN1/ SYSFAN2 Idle Temp
Use this item to set CPUFAN/SYSFAN1/SYSFAN2 idle speed temperature. Fan
will run at idle speed when below this temperature.
SYSFAN1/ SYSFAN2 Stop Temp
Use this item to set SYSFAN1/SYSFAN2 stop temp. Fan will stop when below this
temperature.
