34
PCIE2 Slot
Enable Root Port
Use this item to enable or disable the Root Port. Root Port will Always Enable if
set x8 Bifurcation.
The optional settings: [Disabled]; [Enabled]; [Auto].
Max Link Speed
Use this item to configure PEG 0:1:0 Max Speed.
The optional settings: [Auto]; [Gen1]; [Gen2]; [Gen3].
Max Link Width
This item is for user to force PEG link to retrain to X1/2/4/8.
The optional settings are: [Auto]; [Force X1]; [Force X2]; [Force X4]; [Force X 8].
PCIE4 Slot (Bifurcation)
Max Link Speed
Use this item to configure PEG 0:1:1 Max Speed.
The optional settings: [Auto]; [Gen1]; [Gen2]; [Gen3].
Max Link Width
This item is for user to force PEG link to retrain to X1/2/4/8.
The optional settings: [Auto]; [Force X1]; [Force X2]; [Force X4].
Detect Non-Compliance Device
This item is for user to detect Non-Compliance PCI Express Device in PEG.
The optional settings: [Disabled]; [Enabled].
►
PCH-IO Configuration
Press [Enter] to make settings for the following sub-items:
PCH-IO Configuration
HD Audio
Use this item to control Detection of the HD-Audio device.
The optional settings: [Disabled]; [Enabled].
[
Disabled
]: HDA will be unconditionally disabled.
[
Enabled
]: HAD will be unconditionally enabled.
Onboard Lan1 Controller
Use this item to enable or disable corresponding onboard NIC device or controller.
The optional settings: [Enabled]; [Disabled].
When set as [Enabled], the following sub-items shall appear:
Wake on LAN Enable
Use this item to enable or disable integrated LAN to wake the system.
The optional settings: [Enabled]; [Disabled].
Onboard Lan2 / Lan3 / Lan4 Controller
Use this item to control the PCI Express Root Port.
The optional settings: [Disabled]; [Enabled].
System State After Power Failure
Use this item to specify what state to go to when power is re-applied after a power
failure (G3 state).
The optional settings: [Always On]; [Always Off]; [Former State].
*
Note
:
The option [Always On] and [Former State] are affected by ‘
ERP Support
’
function. Please disable ERP to support [Always On] and [Former State] function.
