37
User can select a value in the range of [10] to [4095
] seconds when ‘
WatchDog
Wake-up Timer Unit
’ set as [Sec]; or in the range of [1] to [4095] minutes when
‘
WatchDog Wake-up Timer Unit
’ set as [Min].
WatchDog Wake-up Timer Unit
The optional settings are: [Sec.]; [Min.].
ATX Power Emulate AT Power
This item support Emulate AT power function, MB power On/Off control by power
supply. Use needs to select
‘AT or ATX Mode’ on MB jumper at first
(refer to
AT_MODE Pin 1&2 jumper setting for ATX Mode & Pin 2&3 jumper setting for AT
Mode Select).
Serial Port Console Redirection
Press [Enter] to make settings for the following sub-items:
COM1
Console Redirection
Use this item to enable or disable COM1 Console Redirection.
The optional settings are: [Disabled]; [Enabled].
When set as
[Enabled
], user can make further settings in the
‘
Console
Redirection Settings
’ screen:
Console Redirection Settings
The settings specify how the host computer and the remote computer (which the
user is using) will exchange data. Both computers should have the same or
compatible settings.
Press [Enter] to make settings for the following sub-items
：
Terminal Type
The optional settings are: [VT100]; [VT100+]; [VT-UTF8]; [ANSI].
[ANSI]:
Extended ASCII char set;
[VT100]:
ASCII char set;
[VT100+]:
Extends VT100 to support color, function keys, etc.;
[VT-UTF8]:
Uses UTF8 encoding to map Unicode chars onto 1 or more bytes.
Bits per second
Use this item to select serial port transmission speed. The speed must be
matched on the other side. Long or noisy lines may require lower speeds.
