background image

 
 
 

 

                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                 

 
 
 

 

23 

WatchDog Wake-up Timer Unit 

The optional settings are: [Sec.]; [Min.]. 

ATX Power Emulate AT Power 

This item support Emulate AT power function, MB power On/Off control by power 
supply.  Use  needs  to  select  ‘AT  or  ATX  Mode’  on  MB  jumper  at  first  (refer  to 
AT_MODE jumper setting Pin 1&2 of for ATX Mode & Pin 2&3 of AT Mode Select). 

 

Serial Port Console Redirection 

     

COM1 

Console Redirection 

Use this item to console redirection enable or disable

 

The optional settings: [Disabled]; [Enabled]. When set as [Enabled], the following 
sub-items shall appear: 

 

Console Redirection Settings 

The settings specify how the host computer and the remote computer (which the 
user  is  using)  will  exchange  data.  Both  computers  should  have  the  same  or 
compatible settings. 
Press [Enter] to make settings for the following items:

 

Terminal Type 

The optional settings: [VT100]; [VT100+]; [VT-UTF8]; [ANSI].   

Emulation

:  ASNI:  Extended  ASCII  char  set;  VT100:  ASCII  char  set;  VT100+: 

Extends  VT100  to  support  color,  function  keys,  etc.;  VT-UTF8:  Uses  UTF8 
encoding to map Unicode chars onto 1 or more bytes. 

Bits per second 

Use  this  item  to  select  serial  port  transmission  speed.  The  speed  must  be 
matched on the other side. Long or noisy lines may require lower speeds. 
The optional settings: [9600]; [19200]; [38400]; [57600]; [115200].   

Data Bits 

The optional settings: [7]; [8]. 

Parity 

A parity bit can be sent with the data bits to detect some transmission errors. 

Содержание HBJC390F841VAG34B













































Отзывы: