29
IDE DMA transfer access
The integrated peripheral controller contains an IDE interface with support for one IDE channels.
Select
Enabled
to activate each channel separately. The settings are: Enabled and Disabled.
Primary Master/Slave PIO
The two IDE PIO (Programmed Input/Output) fields let you set a PIO mode (0-2) for each of the two
IDE devices that the onboard IDE interface supports. Modes 0 through 2 provide successively
increased performance. In Auto mode, the system automatically determines the best mode for each
device. The settings are: Auto, Mode 0, Mode 1, Mode 2, Mode 3, Mode 4.
Primary Master/Slave UDMA
Ultra DMA/33 implementation is possible only if your IDE hard drive supports it and the
operating environment includes a DMA driver (Windows 95 OSR2 or a third-party IDE bus
master driver). If your hard drive and your system software both support Ultra DMA/33 and
Ultra DMA/66, select Auto to enable BIOS support. The settings are: Auto, Disabled.
IDE HDD Block Mode
Block mode is also called
quick transfer
, multiple commands, or multiple sector read/write. If your
IDE hard drive supports block mode (most new drives do), select Enabled for automatic detection of
the optimal number of block read/writes per sector the drive can support. The settings are: Enabled,
Disabled.
Onchip SATA Controller
This item allows you to control Serial ATA controller.
3-7-3 Onchip PCI Device
Phoenix – AwardBIOS CMOS Setup Utility
OnChip PCI Function
Item Help
Onboard
LAN Device Enabled
Onboard Lan Boot Rom Disabled
HD Audio
Auto
Onchip USB Controller Enabled
USB EHCI Controller Enabled
USB keyboard Support Enabled
Onboard JMB363 SATA Disabled
*Onboard JMB363 SATA Type Raid Controller
USB Printer compatibility Enabled
Menu Level >>
↑↓→←
Move Enter:/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Optimized Defaults F7:Standard Defaults
Onboard LAN device (Enabled)
This option allows you to control the onboard LAN device.
HD Audio
This item allows you to decide to enable/disable the chipset family to support onboard HD
audio device. The settings are:
Auto
, Disabled.
Onchip USB Controller
Select
Enabled
if your system contains a Universal Serial Bus (USB) controller and you have
a USB peripherals. The settings are: Enabled, Disabled.
USB Device Support
Select
Enabled
if your system contains a Universal Serial Bus (USB) controller and you have
a USB device. The settings are: Enabled, Disabled.
