Power Management : Disabled
PM Control by APM : Yes
Video Off Method : V/H SYNC+Blank
Video Off After : Stand by
MODEM Use IRQ : 3
Doze Mode : Disabled
Standby Mode : Disabled
Suspend Mode : Disabled
HDD Power Down : Disabled
Throttle Duty Cycle : 62.5%
ZZ Active in Suspend : Disabled
VGA Active Monitor : Enabled
Soft-Off by PWR-BTTN : Instant-Off
CPUFAN Off In Suspend : Enabled
Resume by Ring : Enabled
IRQ 8 Break Suspend : Disabled
** Reload Global Timer Events **
IRQ [3-7, 9-15], NMI : Enabled
Primary IDE 0 : Disabled
Primary IDE 1 : Disabled
Secondary IDE 0 : Disabled
Secondary IDE 1 : Disabled
Floppy Disk : Disabled
Serial Port : Enabled
Parallel Port : Disabled
Esc: Quit ↑↓→←: Select Item
F1 : Help Pu/Pd/+/-: Modify
F5 : Old Values (Shift)F2 : Color
F6 : Load Optimal Defaults
F7 : Load Standard Defaults
Figure 3-4
Power Management:
This category allows you to select the type (or degree) of power
saving and is directly related to the following modes:
Doze Mode , Standby Mode ,
Suspend Mode , HDD Power Down
There are four selections for Power Management, three of which have fixed mode settings.
Disable (default)
No power management. Disables all four modes
Min. Power Saving
Minimum power management. Doze Mode = 1 hr. Standby Mode
= 1 hr., Suspend Mode = 1 hr., and HDD Power Down = 15 min.
Max.
Power
Saving
Maximum power management --
ONLY AVAILABLE FOR SL
CPU’S
. Doze Mode = 1 min., Standby Mode = 1 min., Suspend
Mode = 1 min., and HDD Power Down = 1 min.
User Defined
Allows you to set each mode individually. When not disabled,
each of the ranges are from 1 min. to 1 hr. except for HDD Power
Down which ranges from 1 min. to 15 min. and disable.
PM Control APM:
When enabled, an Advanced Power Management device will be activated
to enhance the Max. Power Saving mode and stop the CPU internal clock.
If the Max. Power Saving is not enabled, this will be preset to
No
.
Video Off Method: This determines the manner in which the monitor is blanked.
V/H
SYNC+Blank
This selection will cause the system to turn off the vertical and
horizontal synchronization ports and write blanks to the video buffer.
Blank Screen
This option only writes blanks to the video buffer.
DPMS
Initial display power management signaling.
Video Off After: When enabled, this feature allows the VGA adapter to operate in a
power saving mode.
N/A
Monitor will remain on during power saving modes.
Suspend
Monitor blanked when the systems enters the Suspend mode.
Standby
Monitor blanked when the system enters Standby mode.
Doze
Monitor blanked when the system enters any power saving mode.
19
