30
There values is used to specify the Temp-Over register/ Tem-under register of PC HEALTH
MONITOR CHIP, If the temperature of the external thermistor is higher than this value and
“System/CPU” is enabled in Monitoring Config. the monitor software will pop up a window to
inform user.
Monitoring Config.
Enabled or Disabled:
User can decide which item should be monitored or not by choosing the
item in the configuration page.
Faults Count (1 or 3):
User can decide the system to pop up the warning message when there
is 1 fault detected or there are 3 consecutive faults detected.
Beep:
In addition to pop up warning message user can choose to activate Beep
tone if there is error detected. Beep tone will until the error is treated.
4-3 Sound Driver & Audio Rack Installation( Option for Motherboard
That Embedded Audio Chip ) :
Special Features for CMI8738 audio chip
PCI Plug and Play (PnP) bus interface, 32 bit PCI bus master.
Full duplex playback and recording, built-in 16 bits CODEC.
HRTF 3D positional audio, supports both Direct Sound 3D® & A3D® interfaces, supports
earphones, two and four channel speakers mode.
Support Windows 3.1 / 95 / 98 and Windows NT 4.0.
Built-in 32 OHM Earphone buffer and 3D surround.
MPU-401 Game/Midi port and legacy audio SB16 support.
Downloadable Wave Table Synthesizer, supports Direct Music®.
• Digital Audio (SPDIF IN/OUT)
Up to 24 bit stereo 44KHz sampling rate voice playback/recording.