26
Auto Detect DIMM/PCI Clk Enabled
Spreed Spectrum
Disabled
CPU Host/PCI Clock Default
Item Help
Menu Level
¾
↑↓←→
Move Enter: Select +/-/PU/PD: Value F10:Save ESC: Exit F1:General Help
F5:Previous Values F6:Fail-Safe Defaults F7:Optimized Defaults
Figure 3-8
DIMM/PCI CLK:
This item allows you to enable/disable auto detect DIMM/PCI Clock.
The choice: Enabled, Disabled.
Spread Spectrum:
This item allows you to choice CPU clock/Spread Spectrum (ON,OFF)
(66MHz,75MHz……..) enable/disable the spread spectrum modulate.
The choice: Disabled (the CPU clock Depend on Jumper), 0.25%, 0.05%.
CPU Host/PCI Clock:
In this item you can choose the CPU HOST/PCI Clock. The setting
are: Default ,66/33,75/37,83/41,100/33,103/34, 112/37,124/41, 124/31,133/33,133/44,
140/35. IF the setting is ”default” , CPU HOST Clock will depend on the setting of U19.
If U19 is set to 66MHz, you have only the choice of 66/33, 75/37, 83/41 on screen.
If U19 is setting to 100MHz, you can have 100/33,103/34,112/37,124/41, 124/41.
If U19 is setting to 133MHz, you have the choice: 133/33,133/44,140/35.
*Please turn off system power if the screen does not have any display after change of the
setting. Then press and hold down “ INS ” key, and turn on system power again (release
“ INS ” key till the screen has display) to reset correct frequency of CPU HOST clock.
3-9 LOAD OPTIMAL DEFAULTS
Load Optimal Defaults:
When you press <Enter> on this item you get a confirmation dialog box with a message
similar to:
Load Optimal Defaults (Y/N) ? N
Pressing ‘Y’ loads the Optimal default values for the most stable, optimal performance
system operations.
3-10 LOAD STANDARD DEFAULTS
Load Standard Defaults:
When you press <Enter> on this item you get a confirmation dialog box with a message as:
Load Standard Defaults (Y/N) ? N
Pressing ‘Y’ loads the Standard default values that are factory settings for normal
performance system operations.
3-11 SUPERVISOR/USER PASSWORD SETTING
In this section you can set either supervisor or user password, or both of then.
