21
3-3 CHIPSET FEATURES SETUP
This section describes features of the VIA Apollo Pro AGPset. If your system contains a different
chipset, this section will bear little resemblance to what you see on your screen.
ADVANCED OPTIONS. The parameters in this screen are for system designers, service
personnel, and technically competent users only. Do not reset these values unless you
understand the consequences of your changes.
ROM PCI/ISA BIOS (2A6LGJ1F)
CHIPSET FEATURES SETUP
AWARD SOFTWARE, INC.
Bank 0/1 DRAM Timing : SDRAM 10ns
Bank 2/3 DRAM Timing : SDRAM 10ns
Bank 4/5 DRAM Timing : SDRAM 10ns
SDRAM Cycle Length : 3
DRAM Clock : Host CLK
Memory Hole : Disabled
Read Around write : Disabled
Concurrent PCI/Host : Disabled
System BIOS Cacheable : Enabled
Video RAM Cacheable : Enabled
AGP Aperture Size : 64M
AGP-2X Mode : Enabled
OnChip USB : Enabled
USB Keyboard Support : Disabled
Auto Detect DIMM/PCI Clk : Enabled
Spread Spectrum : Disabled
CPU Host/PCI Clock : Default
Current System Temp. : 34
°
C/93
°
F
Current CPU Temperature : 44
°
C/111
°
F
Current CPUFAN Speed : 0 RPM
Current SYSFAN Speed : 0 RPM
Core : 2.80V +3.3V : 3.3V
+5V : 5.10V +12V : 12 V
-12V : 12 V
Shutdown Temperature : 75
°
C/167
°
F
Esc: Quit ↑↓→←: Select Item
F1 : Help PU/PD/+/-:Modify
F5 : Old Values (Shift)F2 : Color
F6 : Load Optimal Defaults
F7 : Load Standard Defaults
Figure 3-3
•
In this item you can choose the CPU HOST/PCI Clock. The setting are:
Default ,66/33,75/37,83/41,100/33,103/34, 112/37,124/41, 105/35,110/36,115/38,
120/40,133/33,140/35,150/37.
When the setting is :”default” the CPU HOST Clock will depend on the setting of JP12 and
JP11.
If JP12,JP11 are set to 66MHz only have the choice of 66/33, 75/37, 83/41 on screen.
If the JP12,JP11 are setting at 100MHz, then you can have 100/33,103/34,112/37,124/41,
105/35,110/36,115/38,120/40.
If JP12,JP11 are setting at 133MHz, the you have the choice: 133/33,140/35,150/37.
*Please turn off system power if the screen does not have any display after change of the
setting. Then press and hold down “ INS ” key, and turn on system power again (release
“ INS ” key till the screen has display) to reset correct frequency of CPU HOST clock.
•
DRAM Clock:
In this item you have the choice : Host CLK , HCLK+33M, HCLK –33M. We
recommend the Max. DRAM clock
≤
133MHz otherwise the system will not stable.
•
Vcore , +3.3V,+5V,+12V,-12V, are show the status of system voltages.
3-4 POWER MANAGEMENT SETUP
