16
USB Port Headers
USB2
VCC
Pin 1
-
DATA
GND
+DATA
VCC
OC
-
DATA
GND
+DATA
OC (Over Current)
(5) Power Button/ Reset Button/ SPDIF-In (Receiver) Optical Header (7-pin) : JW_FP
SPDIF-In
The SPDIF-In Optical Receiver Connector, by this connector you can in-put digital signal from
other device such like CD-ROM, CD player to get high quality audio.
Power switch: POWER BUTTON
This 2-pin connector connects to the case-mounted power switch to power ON/OFF the system
Reset switch lead: RESET BUTTON
This 2-pin connector connects to the case-mounted reset switch for rebooting your computer
without having to turn off your power switch. This is a preferred method of rebooting in order
to prolong the lift of the system’s power supply. See the figure below.
1
3
5
7
2
4
6
POWER BUTTON
SPDIF VCC
GND
SPDIF_IN
RESET BUTTON
(6)
External Remote Control Connect Cable Header: JP7
JP7 is for connect External Remote Control, when plug out the connect cable you have to insert
the jumpers in 3-5, 7-9, 4-6, 8-10 otherwise the On board Keyboard and Mouse will not work.
JP7
Pin 1
GND
KB-DATA
MS-DATA
EXT-KB-DATA
EXT-MS-DATA
VCC
KB-CLK
MS-CLK
EXT-KB-CLK
EXT-MS-CLK
2
9
10
(7)
Speaker connector: SPEAK
This 4-pin connector connects to the case-mounted speaker. See the figure below.
(8) LCD Display Panel/ LED Header (2x6pin) : JW_LCD
Power LED: PWR-LED
The Power LED is light on while the system power is on. Connect the Power LED from the
system case to this pin.
IDE Activity LED: HDD_LED, DVD_LED
This connector connects to the hard disk/ CD ROM activity indicator light on the case.
