CyrixIII Clock Ratio Default
Auto Detect DIMM/PCI Clock Enabled
Spread Spectrum Disabled
** Current Host Clock is 66Mhz **
Host Clock at Next Boot is 66Mhz
** Current DRAM Clock is 66Mhz **
DRAM Clock at Next Boot is 66Mhz (HOST CLK)
Item Help
Menu Level >
CyrixIII CPU Ratio
Adjustment
↑↓→←
Move Enter:Select Item +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Optimized Defaults F7:Standard Defaults
By press PageDown/PageUp key you can change the Host clock frequency
When jumper setting
66MHz
you can choose 66
99MHz
When jumper setting
100MHz you can choose 100
132MHz
When jumper setting
133MHz you can choose 133
166MHz
2-4 Install Memory
This motherboard provides
three
168-pin DUAL INLINE MEMORY MODULES (DIMM)
sites for memory expansion available from minimum memory size of 32MB to maximum
memory size of 1.5GB SDRAM.
Valid Memory Configurations
Bank
168-Pin DIMM
Total Memory
Bank 0, 1 (DIMM1)
SDRAM 32, 64, 128, 256, 512MB
X1
32MB
512MB
Bank 2, 3 (DIMM2)
SDRAM 32, 64, 128, 256, 512MB
X1
32MB
512MB
Bank 4, 5 (DIMM3)
SDRAM 32, 64, 128, 256, 512MB
X1
32MB
512MB
Total
System Memory (Max. 1.5GB)
32MB
1.5GB
NOTE!
Make sure the total installed memory does not exceeds 1.5GB, otherwise the
system may hang during startup.
Generally, installing SDRAM modules to your motherboard is very easy, you can refer to
figure 2-4 to see what a 168-Pin PC100 & PC133 SDRAM module looks like.
12