Table for the Pentium III and Celeron Socket 370 CPU
Celeron
Pentium III
Pentium III
Speed
Bus
Ratio
Speed
Bus
Ratio
Speed
Bus
Ratio
300/66
66MHz
4.5x
500E/100
100MHz
5.0x
700E/100
100MHz
7.0x
333/66
66MHz
5.0x
533EB/133
133MHz
4.0x
733/133
133MHz
5.5x
366/66
66MHz
5.5x
550E/100
100MHz
5.5x
750E/100
100MHz
7.5x
400/66
66MHz
6.0x
600E/100
100MHz
6.0x
800E/100
100MHz
8.0x
466/66
66MHz
7.0x
600EB/133
133MHz
4.5x
866/133
133MHz
6.5x
500/66
66MHz
7.5x
650E/100
100MHz
6.5x
933/133
133MHz
7.0x
533/66
66MHz
8.0x
667/133
133MHz
5.0x
1.0B GHz/133
133MHz
7.5x
533A/66
66MHz
8.0x
566/66
66MHz
8.5x
Because the Ratio are fixed by CPU Manufacture, users
don’t need to setting ratio any more, this table just for
reference use.
600/66
66MHz
9.0x
633/66
66MHz
9.5x
667/66
66MHz
10.0x
700/66
66MHz
10.5x
733/66
66MHz 11.0x
766/66
66MHz 11.5x
800/100
100MHz
8.0x
850/100
100MHz
8.5x
900/100
100MHz
9.0x
3. CMOS RAM Clear: JBAT
WARNING: Make sure your computer is POWER OFF when you CLEAR CMOS.
Connect a jumper cap over pin 2 & 3 of this jumper for a few seconds, will clears
information stored in the CMOS RAM Chip that input by user, such as hard disk
information and passwords. After CLEAR CMOS, you must put jumper cap back to
pin 1 & 2 location and enter the BIOS setup (by holding down <DEL> during power-
up) to re-enter BIOS information (see BIOS SETUP).
Selections
JBAT
Normal
1-2 (Default)
Clear CMOS
2-3 (momentarily)
9