JETWAY 615TCFR1C, Руководство пользователя

Страница: 44 / 57

41
This will show the CPU/FAN/System voltage chart and FAN Speed.
Shutdown Temperature
This option is for setting the Shutdown temperature level for the processor. When the
processor reaches the temperature you set, this will shutdown the system.
3-11 Miscellaneous Control
This section is for setting CPU Miscellaneous Control.
CMOS Setup Utility – Copyright(C) 1984-2000 Award Software
Miscellaneous Control
Item Help
Cyrix III Clock Ratio Default
Auto Detect DIMM/PCI Clk Enabled
Spread Spectrum Disabled
** Current Host Clock is 100 Mhz **
CPU Host/SDRAM/PCI Clock 100/100/33Mhz
CPU Clock Ratio X 3
Menu Level >
CyrixIII CPU Ratio
Adjust
↑↓→←
Move Enter:Select Item +/-/PU/PD:Value F10:Save ESC:Exit F1:General Help
F5:Previous Values F6:Optimized Defaults F7:Standard Defaults
Auto Detect DIMM/PCI Clk
This item allows you to enable/disable auto detect DIMM/PCI Clock.
The settings are: Enabled, Disabled.
Spread Spectrum
This item allows you to set the Spread Spectrum.
CPU/SDRAM/PCI Clock
This item allows you to select the CPU/SDRAM/PCI Clock, refer to Page 13.
By press PageDown/PageUp key you can change the CPU Host/SDRAM/PCI Clock
When jumper setting CPU Host Clock 66MHz you can choose 66/100/33
∼
99/133/49MHz
When jumper setting CPU Host Clock 100MHz you can choose 100/100/33
∼
132/132/44MHz
When jumper setting CPU Host Clock 133MHz you can choose 133/133/33
∼
166/166/41MHz
CPU Clock Ratio
This item allows you to select the CPU ratio.
3-12 Load Standard/Optimized Defaults
Load Standard Defaults
When you press <Enter> on this item, you get confirmation dialog box with a message
similar to:
Load Standard Defaults (Y/N)? N