Jetview jed2216t, Руководство пользователя

Страница: 10 / 46

User Manual
7
Chapter3 Connecting DVR
3.1
HDD installation
Caution: Please do not Install or take out hard drive when DVR is running!
The model has a HDD drawer. Please use provided key to take out the HDD drawer and put HDD into the
drawer correctly.
Please follow the below steps to install the HDD:
1. Loosen the screw from upper cover and remove the upper cover and LCD on the power break mode;
2. Insert data cord and power cable into HDD securely;
3. Fix the HDD on the rack;
4. Put the upper cover and LCD back carefully, re-attach screws.
3.2
Camera and Monitor Connection
Connect camera cable to video input of DVR, and from video output of DVR to Monitor via BNC
connector (Refer to section2.3-Rear Panel); or
If the camera is a PTZ speed dome, you could connect RS485 A & B to the according port of DVR
respectively (refer to system figuration on Chapter 8).
3.3
Power Supply connection
Please only use the power adapter supplied with the DVR.