12
8. Maintenance
Procedure
Daily
Weekly
Monthly
60 days
90 days
Clean all assemblies and components
thoroughly with dry cloth
X
Inspect fasteners and screws
X
Inspect and check 9 v battery for display.
Lifetime is 10-15 hours constant use
X
Check Belt Tension. Replace if excess wear has
occurred. Excessive wear has occurred when
the belts are no longer able to effectively grip
the cable optic cable
X
Pipe Pack Seal Replacement
X
Belts Replacement
Every 50 km unless excessive wear is occurring
Seals Replacement
Every 10 km unless excessive wear is occurring
IMPORTANT!
• Check oil level daily and refill container if
needed. Oil level should never be completely
empty
• Check oil dispenser unit if it´s working by
looking at the small glass bulb on top, if
properly adjusted and in working order it will
dispense 3 drops/min otherwise adjust it by
turning it to the correct amount
• (Do not run engines with empty or defect oil
dispenser!)
How-to
• Turn off the machine
• Make sure that the machine is level
• Un-screw the glass container (no tools needed)
• Refill with “Jetting Lubrication 1L Oil32” art.nr: 1030
• Screw it back on (no tools needed)
• Always dry clean air
• Check/empty water separator
• Use compressor with water separator/dryer
• Placed on the machine
• If machine is not used every day or you leave
it for the weekend/holiday we recommend
cleaning and lubricate the motors
• Inject a good gulp of oil into the motors an rotate the motors
Disconnect air supply and exhaust any air pressure
before servicing any component on the MJET V2.
DANGER! Risk of air under pressure penetrating skin.
