Jette JESSE, Руководство пользователя

Страница: 14 / 76

Turnover function:
Flap both plastic clips above the front wheel to the left in order to
fasten the front wheels (fig. 6a). For activation of the turnover func-
tion, flap the plastic lever to the right (fig. 6b).
Adjustment of the foot rest:
The foot rest can be brought in the desired position by pushing both
levers on the right and left underside (fig.7).
Safety harness:
For fastening the seat belt close both buckles (A + B) at the centre
piece (C). In order to open the safety belt, push the clips on the sides
simultaneously and pull the buckles apart (fig.8).
In order to be able to provide maximum safety for your child, adjust
the length of the belt to your child. The length of the belt should be
adjusted in a manner that the belt is resting tightly against your
child.
Adjustable backrest:
You can adjust the back rest to a seating or resting position by means
of the belt fastener, by adjusting the length of the belt when pushing
both buttons (fig. 9a & 9b).
Attachment of the roof:
Attach both plastic clips of the roof (fig. 10a) to the frame above the
arm rest (fig. 10b). Now you can unfold the roof. For detaching the
roof, repeat the procedure in reversed order.
Detaching the bracket:
In order to attach the bracket, plug these into the two designated
bracket-receiving openings at the seating part. For detaching the
brackets, push the sidewise buttons that are located at the lower side
of the bracket (fig. 11a) and pull the bracket from the fixture (fig.
11b).
GB