8
Speed Boosting System
The Speed Boosting System (also known
as the 1:1 Boosting System) assists with
manual operation of the electric bike.
When pedaling, it will automatically
sense your riding speed and assist
accordingly, to make your ride easier.
The boosting system is comprised of three parts: a Controller, a
Sensor, and an Induced Cartridge.
Charging the Battery
Charge the battery before your first use. To obtain a full charge,
it is recommended that you charge the battery for 6 to 8 hours.
After your first charge, use the electric bike until the battery is
fully drained. Then, charge the battery again for 8 to 9 hours. This
cycle will help activate the battery, and ensure the longevity of
the battery’s life.
Only use the included charger with this battery. The use of char-
gers not designed for the electric bike will void the warranty.
Using other chargers may do permanent damage to the battery,
and could lead to unexpected dangers.
To charge the battery:
1. Check that the voltage of your power source matches the
rated input voltage of the charger.
2. Connect the output plug of the charger with the charging
jack of the battery. Connect the plug into an AC power supply.
3. Check that the power indicator light and the charge indica-
tor lights are on. This shows that the battery is charging properly.
When the light turns green, the battery is sufficiently charged.
4. After the battery is fully charged, unplug the cable from both
the AC power supply and the battery.
NOTE: The battery should be charged away from high temperature, high humid-
ity, and fire. Do not overcharge the battery, as that will reduce its longevity. Once
the battery is fully charged, unplug it as soon as possible to avoid overcharging.
OPERATION AND ADJUSTMENT
Содержание J2000-BLK
Страница 1: ...USER MANUAL MODEL J2000 BLK ELECTRIC MOUNTAIN BIKE...
Страница 4: ...2...
Страница 24: ...A LEADER IN ELECTRIC MOBILITY 888 976 9904 WWW JETSONBIKE COM...