14
HOW TO USE THE BIKE CONTROLS
Be cautious as you become accustomed to the Adventure. There are 9 levels of
Pedal Assist. The Pedal Assist should be set at 0 when you’re first getting on the
Adventure.
GEARS
The Adventure is a 21-speed e-bike. There are 3 gears in the front and 7 in the
rear – change gears by using the Shifters on the handlebar. Only shift gears
when pedaling. These gears do not require battery power, and if the battery
runs out, you can still use these gears.
TURNING THE BIKE ON AND OFF
To turn the Adventure on, press the Power Button (M). To turn it off, hold the
Power Button (M) for several seconds. If you do not turn off the bike, it will shut
off automatically after 10 minutes.
If the LCD Display does not turn on, check that the battery is charged and the
LCD Display is fully connected. If you are still having issues, please contact
Jetson support.
PEDAL ASSIST
The Pedal Assist mode was designed to make riding an e-bike mimic the
natural motion you are used to feeling when riding a bicycle. As you pedal
your bike, a sensor is activated, which in turn generates power from the motor.
The power is activated only when you pedal – and the amount of power is
determined by the pedal assist level that you choose.
Speed:
Error Codes
current, average,
maximum
Units
Distance: trip,
overall, remaining
Walk mode
Lights
Battery
indicator
Power button
Up button
Down button
